1. ALWAYS call the fire department first. A fire, no matter how small, may spread out of your control more rapidly than you anticipate. A timely call to the fire department may spare you much disappointment later on in the process.

2. Once you have assured yourself that the fire department is on the way, retrieve the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher from its handy Reddi-Stor wall-mounted storage bracket.

A. First grasp the locking clasp firmly with the left hand, making sure to hold the locking tab between thumb and forefinger.

B. Pull up and to the left.

C. With the right hand, hold down the retainer arm, gripping it at a point approximately two-thirds of its length away from the left-hand end.

D. Grasp the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher firmly in the left hand and pull it straight up. DO NOT release the retainer arm until the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher is completely free of the Reddi-Stor wall-mounted storage bracket.

E. Return the retainer arm to its normal position until such time as it becomes necessary to replace the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher in the Reddi-Stor wall-mounted storage bracket.

3. Hold the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher in an upright position. The words “Pyro-Mate Wonder Midget Home & Office Fire Extinguisher, Pyro-Mate Corp., Swissvale” should appear right-side-up on the right-hand side of the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher. If the words “Pyro-Mate Wonder Midget Home & Office Fire Extinguisher, Pyro-Mate Corp., Swissvale” appear on the LEFT-hand side of the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher, then the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher is pointed toward you and will not extinguish the fire.

4. Carefully note the location of the fire. You may find that, by this time, the fire exists in more that one location.

5. Grasp the Insta-Lok locking pin firmly with the right hand and pull it straight toward you. Retain the Insta-Lok locking pin for future use: it will be necessary when returning the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher to its Reddi-Stor wall-mounted storage bracket.

6. Turn the arming lever approximately 75 degrees counter-clockwise to the “READY” position.

7. Remove the childproof cap from the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher nozzle:

A. While pushing in firmly, squeeze the sides of the cap at the points marked S.

B. Turn the cap counter-clockwise until the triangular arrows on the cap and the body of the nozzle are aligned.

C. Push the cap away from the nozzle with both thumbs, placing one thumb on each side of the triangular arrow on the cap. Retain the cap for future use.

D. Remove the foil seal imprinted “SEALED FOR YOUR PROTECTION.” If the seal is punctured or missing, DO NOT USE the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher. Return the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher to your Pyro-Mate dealer for a replacement.

8. Place the index finger of one hand firmly on the Power-Jet trigger, using the other hand to support the weight of the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher.

9. By this time the fire department should have arrived and extinguished the fire. Replace the childproof cap on the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher nozzle.

10. Turn the arming lever approximately 75 degrees clockwise to the “NOT READY” position.

11. Carefully replace the Insta-Lok locking pin in its locking position.

12. Replace the Pyro-Mate Wonder Midget Home & Office Fire Extinguisher on the Reddi-Stor wall-mounted storage bracket, reversing steps A through D in section 2.

13. Since the seal is now broken on the nozzle of your Pyro-Mate Wonder Midget Home & Office Fire Extinguisher, contact your Pyro-Mate dealer immediately to order a new Pyro-Mate Wonder Midget Home & Office Fire Extinguisher.